Tilt-adjustable Mount For Raspberry Pi

The Tilt-Adjustable Camera Module Mount for the Raspberry Pi attaches directly to the Raspberry Pi case for an easy and clean solution to point your PiCam wherever you want. Compatible with the hole pattern of the Raspberry Pi Camera Module v1 and v2 as well as the 'ArduCam 16MP Autofocus' *. Does not obstruct any of the port slots in the RPi case. Made out of clear acrylic. Dimensions:
Mounting surface: 1" / 25.4mm x 2.35" / 60mm
Height: 1.75" / 45mm
Width with camera module mounted and tilted horizontally: 1.6" / 40mm What's included
See picture of disassembled mount.  Includes the two acrylic parts, all bolts, nuts, spacers, screws, double stick tape and assembly instructions.  Does NOT include camera module, Raspberry Pi circuit board nor RaspberryPi enclosure. Tools required for assembly
(not included): - Small Phillips screwdriver (PH0) - Pliers to hold the nut while tightening Now shipping globally!  Shipping costs for US orders of $4.99 are added during checkout. For international orders, the shipping cost is calculated during checkout. 15-day return policy. Designed and Manufactured in Northern California.
Use the Tilt-Adjustable Raspberry Pi Camera Module Mount to create an Apple Homekit camera, see .
Available to buy in the following stores:
US orders:
- Directly from the Poolside Factory on this website
- -
Canada orders: - Directly from the Poolside Factory on this website
-
Other countries: - Directly from the Poolside Factory on this website * For the ArduCam 16MP, you have to take it out of the red/white Arducam enclosure and mount the PCB directly (it has the same hole pattern as the Raspberry Pi Camera Modules).

Returns Not Accepted